Wipers play a particularly important role in people’s daily vehicle use. Safe driving in rainy weather is indispensable, but wipers are consumables. When the wipers aren’t clean, there’s a good chance that people’s wipers will have to be replaced. Today, Xiaoji will teach you how to replace the wiper.
1. Replace the front windshield wiper blade.
1. Prepare in advance for the replacement of wiper blades.
Within 30 seconds after turning off the engine, turn the wiper power switch (starting gear) forward (position A) once. At this time, the wiper is stuck in the middle, and the wiper is in the maintenance mode, which is conducive to maintenance.
2. Extend the wiper arm. Press and hold the buckles on both sides of the wiper blade as shown in Figure ②, and then pull out the wiper blade along the direction of the arrow symbol, as shown in Figure 3 below.
NOTE: Before replacing the wiper blade, place the new wiper blade in an easily accessible area in advance. After disassembling and assembling the wiper, pay attention to the wiper arm, do not touch it with external force, to prevent the wiper arm from falling to the ground suddenly and damaging the windshield.
3. Assemble the wiper blade according to the reverse process. Calibrate the wiper.
NOTE: Run the car after replacing the wiper blades. Turn on the wiper power switch, and the wiper is automatically calibrated.
2. Replace the rear windshield wiper blade.
1. Pull the rear windshield wiper from the rear windshield laminated glass.
2. Turn the windshield wiper blade in the direction of the arrow symbol and remove it immediately.
3. Install the windshield wiper blades according to the reverse process of steps 1 to 2.
Reminder: Always clean the windshield laminated glass, and try to reduce the accumulation on the windshield laminated glass with the wiper, so as to prevent damage to the actual effect of the wiper and reduce its service life. When replacing the wiper, please use the wiper that is the same as the original specification.
Post time: Mar-29-2022